- AddressWorld Trade Center Panama, Floor 16. Office 1601, Urbanization Marbella, Calle 53 Este, PO Box 0832-
- Phone(Working Time)269-4526
tapered roller bearings
Contact NowThe U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.
Bearing Number | Bore Dia | Outer DIa | Width | Size |
---|---|---|---|---|
Fersa HM81649/HM81610 tapered roller bearings | 0.30 mm | 3250 N | 17.000 mm | Snap-Ring |
Fersa HM212047/HM212011 tapered roller bearings | 7.83 kN | 44.5 kN | 330.2 mm | 31.75 mm |
Fersa HM803146/HM803110 tapered roller bearings | 3.6250 in | 3440 lbf | 4560 lbf | 1.4063 in |
Fersa 14585/14525 tapered roller bearings | 4 mm | 16.7 mm | 180 mm | 1 700 min-1 |
Fersa 25877/25821 tapered roller bearings | 200.000 mm | 245000 N | 1300 rpm | 51.00 mm |
Fersa 748S/742 tapered roller bearings | 173 kN | 41.275 mm | 46.3 kN | 1304.1 g |
Fersa H715340/H715311 tapered roller bearings | FSAFS 215 | 87.313 mm | 82.55 mm | 1/4 NPT |
Fersa F15076 tapered roller bearings | 70 N | 70.4 mm | 70.8 mm | 16 mm |
Fersa 30205F tapered roller bearings | 30 max | 15 mm | 0.130 kN | 5.594 kN |
Fersa 495A/493 tapered roller bearings | 89.694 mm | SSAFS 048 KA | 640 r/min | 122.237 mm |
Fersa 2793/2720 tapered roller bearings | 121 max | 16016 | 84 min | 6 000 min-1 |
Fersa 07097/07204 tapered roller bearings | 0.875 in | 0.3438 in | 4.3438 in | 1.5000 in |