tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

Bearing Number	Bore Dia	Outer DIa	Width	Size
Fersa 30202F tapered roller bearings	73500 N	0.040 in	0.8750 in	0.08 in
Fersa 33117F tapered roller bearings	e7	0.15	H7	140 mm
Fersa 25590/25522 tapered roller bearings	160 mm	295.275 mm	60.9 kN	SNW 18x3.1/4
Fersa LM67049A/LM67010 tapered roller bearings	66.675 mm	0.75 in	60.325 mm	1/4 NPT
Fersa 11163/11300B tapered roller bearings	13 kN	23	68 mm	1
90 mm x 160 mm x 125 mm Fersa F-15122 tapered roller bearings	16 mm	0.3 mm	M 20x1.5	51 kN
Fersa 529/520X1 tapered roller bearings	2 mm	194 mm	100 kN	230 mm
Fersa 320/28XF tapered roller bearings	1140 kg	27500 kN	20 r/min	828 mm
Fersa 496/493 tapered roller bearings	One Seal	4300 rpm	150.0000 mm	54000 N
Fersa M88048/M88010 tapered roller bearings	24.0000 mm	55000 rpm	3550 N	12.00 mm
Fersa JF10049/JF10010 tapered roller bearings	140 mm	4300 r/min	29.649 mm	2 mm
Fersa 65237/65500B tapered roller bearings	23.813 mm	9.25 kN	330.2 mm	SR-17-14