- NTN BEARING-SUDAMERICANA, S.A.
- angular contact ball bearings bearing units complex bearings
English
Home>Products>needle roller bearings>Timken J-2012 needle roller bearings
Timken J-2012 MODELS
Need a CAD or 3D Model?
Timken J-2012 needle roller bearings
category
needle roller bearings
Timken J-2012 Bearing SPECIFICATIONS
needle roller bearings 25 ° Angle (α) are a few brands you will find in our inventory. NTN BEARING-SUDAMERICANA, S.A. Find Timken J-2012 needle roller bearings to see what's in 140 Outer Diameter (mm) stock! 65x140x33
- Timken
J-2012
- 65
- 140
- 25 °
- ISO
- 33 mm
- 140 mm
- 65 mm
- 33
-
NTN BEARING-SUDAMERICANA, S.A.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Timken J-2012 needle roller bearingsCodes and sizes
- 65
- 140
- 25 °
- ISO
- 33 mm
- 140 mm
- 65 mm
- 33
- 65x140x33
- 33 mm
Timken J-2012 Timken J-2012 needle roller bearingsCode system
Timken J-2012 bearing Size Chart (mm/inches) | |
|---|---|
| Series | 855 |
| Cone Part Number | 855 |
| Cup Part Number | 854-B |
| Design Units | Imperial |
| Bearing Weight | 17.4 lb |
| Cage Type | Stamped Steel |
| d | 3.5000 in |
| D | 7.5 in |
| D1 - Flange Outer Diameter | 7.8710 in |
| B - Cone Width | 2.2650 in |
| C - Cup Width | 1.7500 in |
| C1 - Cup Flange Width | 0.3750 in |
| T1 - Bearing Width | 2.250 in |
| T - Bearing Width to Flange | 0.8750 in |
| R - Cone Backface To Clear Radius1 | 0.310 in |
| r - Cup Backface To Clear Radius2 | 0.130 in |
| da - Cone Frontface Backing Diameter | 4.06 in |
| db - Cone Backface Backing Diameter | 4.65 in |
| Da - Cup Frontface Backing Diameter | 6.86 in |
| Ab - Cage-Cone Frontface Clearance | 0.06 in |
| Aa - Cage-Cone Backface Clearance | 0.15 in |
| a - Effective Center Location3 | -0.6 in |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 26700 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 103000 lbf |
| C0 - Static Radial Rating | 142000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 15300 lbf |
| K - Factor7 | 1.74 |
| e - ISO Factor8 | 0.33 |
| Y - ISO Factor9 | 1.79 |
| G1 - Heat Generation Factor (Roller-Raceway)10 | 264 |
| G2 - Heat Generation Factor (Rib-Roller End) | 44.9 |
| Cg - Geometry Factor11 | 0.107 |
Timken J-2012 INTERCHANGE
needle roller bearings Part series J-2012 is a potential replacement for these common bearing part numbers:
J-2012
J-2012
J-2012
J-2012
J-2012
J-2012
J-2012
J-2012
Contact Us
- NTN BEARING-SUDAMERICANA, S.A.
- AddressWorld Trade Center Panama, Floor 16. Office 1601, Urbanization Marbella, Calle 53 Este, PO Box 0832-
- Phone(Working Time)269-4526
- Fax
Timken J-2012 Technical Articles
| Can I use wheel bearing grease on ball joints? |
| Can you grease a noisy wheel bearing? |
| Can you use wd40 to clean bearings? |
needle roller bearings CATEGORIES
- angular contact ball bearings
- bearing units
- complex bearings
- cylindrical roller bearings
- deep groove ball bearings
- linear bearings
- needle roller bearings
- plain bearings
- self aligning ball bearings
- spherical roller bearings
- tapered roller bearings
- thrust ball bearings
- thrust roller bearings
- wheel bearings
- NTN Ucp206d1 Bearing
- NTN 6203 Lb Bearing
- Set401 Bearing
- NTN Ucp208d1 Bearing
SIGMA MR-20-N needle roller bearings
SIGMA MR-32-N needle roller bearings
ZEN BK2526 needle roller bearings
ZEN HK4516 needle roller bearings
29 mm x 38 mm x 30 mm ZEN NK29/30 needle roller bearings