tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

Bearing Number	Bore Dia	Outer DIa	Width	Size
NTN 625996 tapered roller bearings	440 mm	5	S 3188x16.1/2	PL 88
NTN 32926DF tapered roller bearings	8000 rpm	6000 rpm	1.50 mm	45.000 mm
NTN 430318U tapered roller bearings	SW 170	1.8 mm	80 mm	117 mm
NTN CRI-2826 tapered roller bearings	43.2 mm	3 kN	26 kN	2.4 mm
NTN M284249D/M284210/M284210DG2 tapered roller bearings	180 mm	52.5 kN	111.125 mm	114.3 mm
NTN CRO-6602 tapered roller bearings	M 80x2	173 kN	M8	HN 16
35 mm x 70 mm x 23 mm NTN 4T-CR-07A14 tapered roller bearings	65.000 mm	1.00 mm	5000 rpm	64000 N
NTN 413122 tapered roller bearings	2.2 mm	602 mm	800 r/min	1100 r/min
300 mm x 495,35 mm x 141,288 mm NTN E-HH258248/HH258210 tapered roller bearings	125.0000 mm	5000 rpm	45000 N	5000 rpm
380 mm x 536 mm x 390 mm NTN E-625976 tapered roller bearings	380 mm x 536 mm x 390 mm	-	-	-
NTN T-H242649D/H242610+A tapered roller bearings	19000 rpm	9750 N	1.00 mm	Two Seals