tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

Bearing Number	Bore Dia	Outer DIa	Width	Size
60 mm x 95 mm x 27 mm SNR 33012A tapered roller bearings	0.7	1.5 mm	15.083 mm	1.5 mm
SNR EC44206S01 tapered roller bearings	6300 rpm	4800 rpm	1.00 mm	50.000 mm
45,3 mm x 80 mm x 48 mm SNR FC40096S04 tapered roller bearings	42300 N	34.00 mm	17.000 mm	14000 rpm
SNR EC12917 tapered roller bearings	2.00 mm	3600 rpm	110000 N	Two Shields & Snap-R
21,5 mm x 47 mm x 16,4 mm SNR EC12250 tapered roller bearings	45.4 kN	75.6 kN	130 mm	219.075 mm
25 mm x 47 mm x 15 mm SNR EC12589S01 tapered roller bearings	149 mm	6 °	75 mm	34 mm
45 mm x 75 mm x 20 mm SNR 32009VC12 tapered roller bearings	90.0000 mm	One Shield & Snap-Ri	4800 rpm	6300 rpm
45 mm x 85 mm x 23 mm SNR 32209BA tapered roller bearings	256	AMP Superseal	8 %	30 °
70 mm x 150 mm x 35 mm SNR 30314A tapered roller bearings	1140 kN	68.5 kg	84.98 mm	2.7 mm
70 mm x 125 mm x 31 mm SNR 32214A tapered roller bearings	24000 rpm	0.30 mm	19000 rpm	10.00 mm
95 mm x 160 mm x 46 mm NKE T2ED095 tapered roller bearings	7 mm	3.64 kg	2.5	84 mm
40 mm x 68 mm x 19 mm NKE 32008-X tapered roller bearings	98.425 mm	0.625 in	3/8 NPT	1/8 NPT