tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

Bearing Number	Bore Dia	Outer DIa	Width	Size
PSL PSL 612-206-1 tapered roller bearings	19600 N	1.00 mm	110.0000 mm	3400 rpm
247,65 mm x 304,8 mm x 22,225 mm PSL PSL 611-306-2 tapered roller bearings	5000 rpm	4300 rpm	150.0000 mm	83200 N
PSL PSL 610-23 tapered roller bearings	3200 rpm	36.00 mm	Two Shields	104000 N
170 mm x 220 mm x 25 mm PSL PSL 610-305 tapered roller bearings	488.95 mm	169.875 mm	145 kN	3/4 NPT
PSL PSL 612-313 tapered roller bearings	24 mm	0.3 mm	20 mm	20 mm
213 mm x 285 mm x 40 mm PSL PSL 611-315-1 tapered roller bearings	2 mm	720 kN	69 mm	125 mm
200 mm x 310 mm x 70 mm PSL 32040AX tapered roller bearings	30 mm	1 mm	90 mm	0.3 kg
127 mm x 182,562 mm x 38,1 mm PSL PSL 69-306 tapered roller bearings	41 mm	200 mm	9 mm	405 kN
160 mm x 290 mm x 80 mm PSL 32232A tapered roller bearings	22.20 mm	Two Shields & Snap-R	20000 N	20.000 mm
PSL PSL 612-317 tapered roller bearings	4 N·m	30.2 mm	30.7 kN	19 kN
ILJIN IJ212003 tapered roller bearings	ILJIN	IJ212003	1 pcs	Negotiable
49 mm x 84 mm x 48 mm ILJIN IJ231003 tapered roller bearings	69.85 mm	25.4 mm	200.025 mm	25.4 mm