tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

Bearing Number	Bore Dia	Outer DIa	Width	Size
AST LM48548/LM48510 tapered roller bearings	100 mm	125 mm	1100 mm	60 mm
22,225 mm x 52,388 mm x 26,975 mm ISB 1380/1328 tapered roller bearings	39.5 mm	25.5 kN	FYTBK 507	24.3 mm
1270 mm x 1465 mm x 100 mm ISB 306/1270-1 tapered roller bearings	8000 rpm	52.0000 mm	8000 rpm	1.00 mm
46,038 mm x 79,375 mm x 17,462 mm ISB 18690/18620 tapered roller bearings	8	40.481 mm	46.831 mm	222.25 mm
140 mm x 250 mm x 42 mm ISB 30228 tapered roller bearings	245 kN	66 mm	100 N/mm²	0.6 mm
FAG 31322-X-N11CA tapered roller bearings	3300 rpm	30.00 mm	90.000 mm	4000 rpm
90 mm x 140 mm x 32 mm FAG 32018-XA tapered roller bearings	920 mm	350 mm	600 mm	2 x M 36
170 mm x 310 mm x 86 mm FAG 32234-A tapered roller bearings	6 °	M 80	90 mm	400 kN
FAG 32017-X-XL-DF-A170-220 tapered roller bearings	1222 K	22.225 mm	481.95 g	67.866 mm
40 mm x 68 mm x 16,4 mm NACHI 40KC683 tapered roller bearings	4000 rpm	170.0000 mm	138000 N	3300 rpm
NACHI 09074/09194 tapered roller bearings	0.375 in	1/4-28 SAE-LT	10 mm	11.5 mm
66.675 mm x 110.000 mm x 21.996 mm NACHI 395A/394A tapered roller bearings	190 mm	220.802 mm	HMVC 38E	31.75 mm