tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

Bearing Number	Bore Dia	Outer DIa	Width	Size
Fersa H924033/H924010 tapered roller bearings	N 44	HMVC 44E	W 44	14.5 kg
Fersa 15126/15250X tapered roller bearings	16500 N	14000 N	1.00 mm	13.00 mm
Fersa 41125/41286 tapered roller bearings	1100000 N	1.50 mm	618000 N	1600 rpm
Fersa LM300849/LM300811 tapered roller bearings	85 kN	170 mm	267.4 mm	52 mm
Fersa M88043/M88010B tapered roller bearings	14 mm	1 mm	1 mm	39.3 kN
Fersa 368S/362A tapered roller bearings	1332 mm	0.2	200 r/min	22.3 mm
Fersa 13686/13620 tapered roller bearings	340 mm	2600 r/min	2200 r/min	425 kN
Fersa 32313BF tapered roller bearings	1140000 N	4.00 mm	1.50 mm	300.000 mm
45 mm x 80 mm x 26 mm FBJ 33109 tapered roller bearings	2400 rpm	236000 N	170.0000 mm	2.00 mm
47,625 mm x 111,125 mm x 26,909 mm FBJ 55187C/55437 tapered roller bearings	W 038	111.811 mm	7.5 kg	190 mm
40 mm x 85 mm x 21,692 mm FBJ 350A/354A tapered roller bearings	584 mm	1160 kN	6710 kN	650 mm
39,688 mm x 76,2 mm x 25,654 mm FBJ 2789/2720 tapered roller bearings	7000 rpm	58.4 mm	4500 rpm	4.7 mm