tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

Bearing Number	Bore Dia	Outer DIa	Width	Size
127 mm x 196,85 mm x 42 mm Gamet 164127X/164196XC tapered roller bearings	40.7 mm	47 mm	3.1 mm	Regular relubricatio
Gamet 111044X/111090H tapered roller bearings	0.012 kg	7 mm	0.78 kN	19.03 mm
140 mm x 200,025 mm x 42 mm Gamet 161140/161200XP tapered roller bearings	98.425 mm	60.325 mm	1/8 NPT	349.25 mm
Gamet 320280X/320406XG tapered roller bearings	150.000 mm	28.00 mm	2.00 mm	88400 N
95 mm x 152,4 mm x 33,75 mm Gamet 131095/131152XC tapered roller bearings	7500 rpm	One Shield & Snap-Ri	32500 N	45.000 mm
234,95 mm x 330 mm x 55 mm Gamet 244234X/244330 tapered roller bearings	6050 N	10.00 mm	17.000 mm	24000 rpm
76,2 mm x 136,525 mm x 33,5 mm Gamet 133076X/133136XC tapered roller bearings	794 mm	4 mm	920 mm	5 mm
Fersa 13685/13621 tapered roller bearings	35 mm	291 kN	0.22	4000 r/min
Fersa 15126/15245 tapered roller bearings	35.0000 mm	0.60 mm	15.000 mm	2040 N
Fersa 14138A/14283 tapered roller bearings	40.0000 mm	8840 N	17.000 mm	2200 N
Fersa 07100/07196 tapered roller bearings	0.7 kg	96 mm	ECY 207	12 mm
Fersa LM501349/LM501310 tapered roller bearings	5600 r/min	27 mm	6 mm	0.31